LA BELLA VIA

My DIY kitchen makeover!

DIY, HOME DECORMonique Bellavia3 Comments

About a month ago I decided I had enough with our dated kitchen. It was so drab and dark, and I never felt comfortable in there. My husband and I talked a lot about our kitchen for the last 2 years we've been in the house. We know we want to gut it. We want to change the entire lay out and knock down some walls including a load bearing wall which is a HUGE project. Pricey probably doesn't even begin to describe what our kitchen dreams would be like. So we knew it would be a project put on hold. Also our kitchen wasn't THAT bad. OK, aesthetically yes, it was depressing, but functionally it was actually decent. Our cabinets are original and in fabulous shape, someone somewhere along the lines did add in a newer granite counter top and stainless steel sink and even though I would have never chosen the two, it still is updated and in great shape. Also our appliances while a bit dated, are not original and totally fully functional. So I decided a face lift is what it needed. So I got to work!

AND NOW!

This make over took me about a week to complete. I used Nuvo one day Cabinet Makeover and even though it states you can do this in 8 hours, that's pretty much impossible if you want a really well done outcome. I did this SOLO as well so that added some time to the whole thing. These are the steps I followed:

  • Remove hardware, doors, and hinges. If you are going to re-use your hardware make sure to put them in baggies and label them clearly. I was not planning to re-use so I just tossed them all in a baggie together
  • Fill old holes and drill new holes for new hardware (if using new hardware) before sanding. I didn't do that. I sanded first then drilled the next day so I had to go back and re-sand. Not fun. Also if you want a really easy way to drill new holes with perfect precision, use a template like this one to measure for you. Saves time and stress!
  • Clean the frames and doors thoroughly with something like TSP.
  • Sand your cabinet frame and doors with a fine grit sand paper.
  • Clean everything again to remove dust.
  • After this I was ready to paint! You can prime them first. I didn't, but I would have if I hadn't forgotten to buy the primer during one of my 10 different trips to home depot! ugh.

I gave my cabinets 3 coats of paint. I did one coat a night. Spreading it out like that is really unnecessary, but it helped me keep my sanity. I felt less pressure and was 100% sure it would be dry when applying the next coat. Thankfully I was able to lay out all my doors in the basement so they weren't all in the way upstairs. It all sounds like more work than it was. In reality I felt like this was a very easy project, just a bit time consuming. The hard part came when trying to re-install the doors on the frames. I was using new hinges and since my cabinets are super old I couldn't find the right ones at any hardware store. I had to order them online. And even those were not a 100% perfect fit. But I managed to drill new holes even after everything was painted, and there was little to no damage done to my precious paint work. My tip: test your new hinges before painting anything and if new holes need to be drilled, do it first! As for installing the handles and pulls, when reading reviews on the hinges I purchased, a lot of people said they had to buy new screws to fit because their doors were thicker or thinner. Mine were a perfect fit. Just test all new hardware first!

  I have to say I liked the Nuvo cabinet paint. I'm not an expert painter so I don't have much to compare it to, but for me it worked. It dried fast, it was nice and thick so you didn't have to apply a ton of coats to hide a darker cabinet. 3 coats worked fine for me. Another tip, the paint kit comes with a roller and a brush. The brush will be streaky and uneven and you will need more than 3 coats of paint to cover a darker cabinet like mine, and the roller will leave tiny little bubbles/bumps. What I did was I applied each coat with the roller then smoothed out the bubbles with the brush. It worked like a charm! I got a nice smooth and even coat all over!

Here are my sources for this kitchen:

  • Cabinet Paint: Nuvo Cabinet Kit in Titanium White: $70 (I bough two kits, but I only needed one)
  • Drawer pulls: $2.19 each. This was a total STEAL compared to what you find elsewhere. And these are heavy solid metal! I highly recommend this brand of hardware.
  • Bar Handle: $24.75 for a 5 pack: Another total STEAL!
  • Hinges: Make sure you buy the correct hinge for your cabinet and test them first!
  • Rug: this was an ebay find!
  • Vintage Mid Century clock: Another ebay score
  • Reclaimed wood shelves: I found this seller Chris Csonka on etsy and I can not say enough just how wonderful he was to work with. He answered all of my questions, and even used the exact stain I requested (this one is minwax Early American).
  • Handmade Iron shelf bracket: Another Etsy find. This seller was also awesome! The brackets are solid thick, heavy iron. We love them!
  • Mini island/kitchen cart: This one is solid and really well made. It was also very easy to put together. Originally I had planned on purchasing this kitchen island from Ikea and I was just going to stain it, but I found this one during Target's 4th of July furniture sale and the difference in price was minimal, when you added in shipping from Ikea because NO store by me carried stock of them.  Also this one has two shelves AND drawers unlike the Ikea one so it was a no brainer.

And that's it for my DIY Kitchen Makeover!! Hope some of these tips are helpful!